TS-G700G guard tour reader is an upgrading product on the basis of TS-G700 guard tour reader. TS-G700G can not only read a normal RFID EM4100 format button or tag which working on frequency of 125KHz in the distance ranging from 3cm to 5cm but also read a 2.4G UHF Tag in the distance ranging from 10 meters to 100 meters. When the fingerprint mark on the front LOGO of reader is pressed for over 8 seconds, the TS-G700G reader will be switched to 2.4G working model. It can scan long distance 2.4GHz Tags or communicate with the 2.4G wireless data downloader for downloading the records. The TS-G700G guard tour reader can be put beside the communication station which is connected with the computer through a USB cable in the range less than 10 meters to download the patrol records from the TS-G700G guard tour reader to the management computer that installed the guard tour software.Additionally, the battery of TS-G700G RFID Reader can be recharged without opening the reader. Just insert TS-G700G guard tour reader into the wireless data downloader station which is connected to a 5VDC transformer.

The Features of RFID Location button or tag
RFID signal cards are constructed to withstand intentional sabotages, which can be read from long distances(0-7cm) and operated in wide temperature ranges. They are also completely waterproof, and can be sealed inside non-metalic material walls; Button, circle, keyring, nail and cylinder-shaped cards used as guard tour checkpoints. These can be installed either on or beneath wall surfaces; Key chain-attachable type personnel / incident card used to identify patrol personnel or events and incidents. Its working frequency is 125KHz.